Everybody is bound to have their personal opinions on the subject of need a plumber.
How to Use a Plumber’s Snake
A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
What To Do When Your Water Heater is Over The Hill
Hot water tanks are some of the neglected household appliances in North American dwellings. We usually ignore it until winter kicks in then find ourselves taken by surprise with the alarm of freezing water. We only recognize the value of this appliance in the morning when the shower is too chilly to handle. This is when you start to panic hunting for the closest heating service to solve the predicament.
Water Heater Life Extension Tips
Quite often, a gas-powered hot water tank lasts an average of ten years. A substitute tank could be purchased at a close by hardware store when it's time if you so choose. The lifespan of these heaters may be extended either with an insulating jacket or by making sure the calcium deposits in the tank are kept clean. A prudent homeowner will follow one or both suggestions to delay the unavoidable installation.
Though it seems logical that old water heaters have to be changed from time to time, you might be curious if it is necessary to do it before it reaches the end.
Exchanging The Water Heater Saves You Money
The biggest benefit of installing a new gas water heater is the cost savings on your heating costs. A new water heater would, most likely, work better than an older model. There are a few things to think about together with your new purchase if you need to take french drain repair full advantage of your savings and that is how much use it will likely be exposed to.
A bigger hot water heater will be desirable if you have a large family. All things considered, more inhabitants in the home means more hot water usage.
Various Hot Water Tanks
Typically, they are classified into two categories - natural gas and electric. Gas units are pricier than electric models - a typical gas heater would normally cost about $800, as electric units may cost about the same, but normally slightly less. A lot of people go with the standard water heater tank, but tankless hot water heaters are also earning popularity, so you might want to take a look at the second kind of hot water heater.
Whether or not you pick a gas-powered or electric water heater, you can select instant hot water with what is referenced as the on-demand water heater system. And certainly people that wish to go green you may consider solar energy water heaters, which greatly lessen the harmful by-products released by other heating units. There is one thing, though - solar heating systems can be challenging to set up, so be sure you employ the right company for the job.
Regardless which way you decide to go regarding a new water heater, it is highly recommended you retain the services of a pro for the work. A heating installation requires technical know-how and an understanding of local codes for air-flow and generally safe functioning. If you are unfamiliar with this kind of work then never endanger your resources or your families safety with a hap-hazard attempt at this kind of work..
As a fervent reader about 24 hour emergency plumbing, I was thinking sharing that topic was worth the trouble. Do you know about someone else who is looking into the subject? Do not hesitate to promote it. Many thanks for being here. Revisit us soon.